Creates a road lined by parallel parking spaces

To use the parallel parking flow:

Click the Lightning Bolt

Select “road-parallel parking”

Click to start the shape.

Click again to add a corner.

Double click to end the command.

<aside> 👉

</aside>

<aside> 👉

Avenues are Line based geometries.

</aside>

Default Settings

To edit the avenue settings after drawing it:

Click into “generated features” in the properties palette:

Round Corner Settings

• Edit corner Radius
• Fillet, bezier, or Chamfer corners
  • Fillet: evenly round corners
  • Bezier: unevenly round corners by dragging node
  • Chamfer: Slice corners at 45 angle
• Adjust which corners receive the radius

Offset Polygon Settings

• Input offset distance
  • use negative distance to shrink
  • use positive distance to grow

Offset Line Settings

• Edit offset distance
• Select offset direction

Parking Lots Settings

• Set the length and width of the bays
• Set the width of the roads between bays
• Determine if islands should be included, and their width
• Adjust the bay angle
• Toggle open corners
• Choose the edge the space should start from with Choose reference Edge

• Add an exclusion zone to remove parking bays from an area of the shape
• Toggle ‘show overlay” to see the parking counts when the geometry is selected
• The output is a geometry with white parking bay lines

Back to All of the Included Flow Templates